Epson PowerLite 8300i Quick Manual page 15

EPSON PowerLite 8300i Projector
Controlling Your Projectors
The control buttons in the upper-right of the EMP Monitor
screen let you turn on and off the projectors and select video
sources. (Hold the mouse pointer over a button to see a
description of its meaning.) Make sure you've selected the
projector(s) you want to operate (with the mouse pointer)
before clicking one of the buttons.
Note: To turn on a projector when it's in standby mode (plugged in
but not projecting), you must have selected
setting in the projector's Advanced1 menu.
Standby Mode
Registering Projectors in
EMP NetworkManager
EMP NetworkManager lets you receive e-mail notifications
alerting you to possible projector problems.
1. To open the program, select
the Start menu.
Note: If the program finds one or more projector by auto-detecting
them on the network, or if they were previously registered in EMP
Monitor, you will see them on this screen.
2. If you'd like to monitor additional projectors you've already
registered using EMP Monitor, click
registration file and click
14 EPSON PowerLite 8300i Projector
-
Control buttons
as the
Network ON
EMP NetworkManager
. Select the
Import
.
Open
Your imported projectors are displayed as icons as shown:
3. If you'd like to register a projector manually and you know
its IP address, click the
You see this screen:
4. Enter the projector's IP address and click
projector's icon is added to the EMP NetworkManager
screen.
from
Creating the E-Mail Settings
1. If EMP NetworkManager is not already running, open it
from the Start menu.
You see your registered projectors displayed as shown:
2. Double-click the icon for the projector whose e-mail
settings you want to create.
5/03
Projector address selection
. The
Add
icon.