Getting Started - Bauhn ATV40FHD-0118 Instruction Manual

Getting Started

IMPORTANT!
Make sure all relevant equipment is properly connected (as
illustrated on the previous pages) before connecting the unit
to a wall socket and turning on the power.
Powering the TV
To turn the power on or off:
• Plug the power cord into a suitable power point, then turn on the power
at the outlet.
Press the POWER button, on the right lower side of the back panel (or
•
on the remote control, making sure to aim it at the sensor at the front of
the TV); the indicator will glow blue. Press it again to power off (standby
mode); the indicator will glow red.
First Use
When you switch on the TV for the first time, the First Time Setup menu will
be displayed on the screen, as illustrated below.
• OSD language: Use the
then use the button to go to the next item.
• Country: Use the
then use the button to go to the next item.
• Auto scan: Use the
+ ATV) and then use the button to go to the next item.
• Press the OK button to begin scanning for stations.
• To exit channel tuning, press the EXIT button and use the
select YES; select NO to continue tuning.
• When auto searching is complete, your TV will show the first channel
found.
15
AUS 1300 886 649
/
buttons to select your OSD language and
/
buttons to select the country you are living in and
/
buttons to select the type of scan (ATV, DTV, DTV
/
buttons to
Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org