Subscribe to Our Youtube Channel
Related Manuals for Redarc SRPA-RM
Summary of Contents for Redarc SRPA-RM
- Page 1 Remote Monitor for Solar Regulator SRPA-RM To suit SRPA0120, SRPA0240 & SRPA0360 Solar Regulators...
-
Page 2: The Solar Regulator Remote Monitor
THE SOLAR REGULATOR REMOTE MONITOR The REDARC Solar Regulator Remote Monitor allows users to monitor how their solar panels are performing and keep track of the charge state of the battery/s being used. The unit is simple to setup and control and provides an easy to read graphical interface, which can be modified to suit the users preferences. -
Page 3: Table Of Contents
4. Do not forget your password. The factory default password is ‘000000’. 5. This user manual is to be read in conjunction with the REDARC SRPA Solar Regulator user manual. CONTENTS THE SOLAR REGULATOR REMOTE MONITOR ................2 WARNING &... -
Page 4: Introduction
INTRODUCTION Dimensions 84 mm / 3.3" 98 mm / 3.9" 114 mm / 4.5" Mounting CAUTION The remote monitor is not waterproof or designed for installation under bonnet or outdoors. Ensure the monitor is installed in a cool and dry environment. -
Page 5: Monitor Operation
MONITOR OPERATION System Status Volts Batt 14.6 Volts S-Pnl 16.2 Amps Charge 01 01 2013 09:39:54 1.Monitoring Charging Logs 2.Device Info. Day: 0.0kWh 3.Control Para. Month: 0.0kWh 4.Device Para. Total: 0.0kWh Battery Info 1/3 5.Device PSW. Battery Info 3/3 Battery Info 2/3 Mode: Absorb 6.Failure Info. -
Page 6: Monitor Information
MONITOR INFORMATION Monitoring System Status This screen shows the essential voltage and charging status of your system: Volts Batt The voltage level of the battery System Status Volts S-Pnl The input voltage from the solar panel Volts Batt 14.6 Amps Charge The real time charging performance in amps Volts S-Pnl 16.2... -
Page 7: Menu
MONITOR INFORMATION Solar Panel Information (2 Screens) These screens show detailed solar panel information: Volts Solar panel real time voltage S-Panel Info 1/2 Amps Solar panel real time amperage from the panel Volts: 16.2 Power The calculated power (watts) the panel is producing Amps: Power: 16.8W... -
Page 8: Device Information
Char. cur The regulators rated charging current Char.cur: Internal serial number (REDARC use only) Control Parameters To change settings, press the ‘OK’ button, enter the device password and press ‘OK’ again. Change the setting to the desired value and press ‘OK’ once more to save the setting. - Page 9 MONITOR INFORMATION Batt AH The Battery amp hours can be set to offer a state of charge percentage, the range is from 1 – 9999Ah. Note 1: This is a calculated guide based on the Battery Information on page 6. Note 2: This setting is a guide only, the battery size does not need to be set for correct function / charging.
- Page 10 28 days 10min Discharge Limit This is the Absorb charging stage time duration, this setting is defaulted to 180 minutes, and can be adjusted from 10 – 180 minutes. Note: REDARC does not recommend changing this or any of the default settings.
-
Page 11: Device Parameters
This is the device password before setting. Device PSW NewPsw This is the new device password. OriPsw: xxxxxx NewPsw: xxxxxx Do not forget your password. The factory default password is ‘000000’. If changed, REDARC recommend recording your new password in the box provided. Password... -
Page 12: Failure Information
The software version, for REDARC use only. Type: SRPA-RM Ver: H02.02+S02.02 The units serial number, for REDARC use only. 201510160000001 Meter Parameters (Screen 2) This screen shows and allows changes to the time duration of the display default screen switching and backlight time: Sw — Pages Timeout / time delay in seconds before the screen... -
Page 13: Remote Monitor Cable (8-Pin Rj45 10 M / 32.8 Ft)
The communication data cable is an 8-Pin RJ45 type Ethernet cable. If a cable of different length is required, REDARC recommend buying a cable of the required length rather than shortening the supplied cable. Plug A Plug B... -
Page 14: Warranty
UK/Europe +44 (0)20 3930 8109 Mexico +52 (558) 526 2898 Design and specifications are subject to change without notice. | Copyright © 2021 REDARC Electronics Pty Ltd. All rights reserved. REDARC® and THE POWER OF REDARC® are trademarks of REDARC Electronics Pty Ltd. - Page 15 NOTES...
- Page 16 Australia power@redarc.com.au www.redarc.com.au +61 8 8322 4848 New Zealand power@redarcelectronics.co.nz www.redarcelectronics.co.nz +64 9 222 1024 North America power@redarcelectronics.com www.redarcelectronics.com United States +1 (704) 247 5150 Canada +1 (604) 260 5512 Mexico +52 (558) 526 2898 UK/Europe power@redarcelectronics.eu www.redarcelectronics.eu +44 (0)20 3930 8109 www.redarc.com.au...
Need help?
Do you have a question about the SRPA-RM and is the answer not in the manual?
Questions and answers