Prerequisites; Connectivity - Dell EMC VxFlex Ready Node 14G Manual

Hide thumbs Also See for EMC VxFlex Ready Node 14G:
Table of Contents

Advertisement

Introduction
Component
Supported web browsers
Java
Other

Prerequisites

Connectivity

Hardware Configuration and Operating System Installation Guide - ESXi Servers
14
Requirement
You can change the default ports. For more information, see "Changing default ports" in the
user documentation.
Internet Explorer 10, or later
l
Firefox, version 42, or later
l
Chrome, version 45, or later
l
v1.8 (64-bit), build 149 or earlier.
l
You can download previous versions from this link:
java/javase/downloads/java-archive-javase8-2177648.html
For a VxFlex OS Gateway server on a Windows node, the Windows Management
l
Instrumentation service must be enabled on the VxFlex OS Installation Manager server
and on all Windows VxFlex OS nodes.
Do not install the VxFlex OS Gateway on a server on which RFcache will be enabled or on
l
which SDC will be installed.
The VxFlex OS Gateway server must have connectivity to all the nodes that are being
l
installed. If you are using separate networks for management and data, the server must be
able to communicate with both networks.
The following prerequisites are relevant to using VxFlex OS software in the VxFlex
Ready Node environment.
Ensure that you have the following information at hand:
The IP address range, subnet, and gateway IP addresses for the management and
l
data network for all servers.
The IP address range for Storage VMs (SVMs).
l
The IP address range, subnet, and gateway IP addresses for the BMC (iDRAC)
l
port for all servers.
All root and administrator passwords that you plan to set or use on the server and
l
BMC (iDRAC).
All root and administrator passwords that you plan to set or use on the SVM.
l
Note
VxFlex Ready Node servers shipped with a factory-installed ESXi image are
configured with root as the username and either the service tag number or
Scaleio123 as the password.
To connect via a service PC or laptop computer using SSH/RDP:
Ensure that the computer has a functional network port and an available IP
l
address, subnet, and gateway on the management network.
For console operations (KVM access):
http://www.oracle.com/technetwork/

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emc vxflex ready node r640Emc vxflex ready node r740xd

Table of Contents