Philips 43PFL4902/F7 Service Manual page 23

Assembly method
1. Lightly place the Front Cabinet on the set.
2. Look into the aperture to see the Front Cabinet
inlays are properly inset to the Rear Frame cut
and raised portions.
Positions of Front Cabinet Inlay and
Rear Frame cut and raised portion
Front Cabinet inlay
OK
Correct View: the plate is hidden
Move the Front Cabinet around (horizontally/
vertically) to see if the inlays are correctly inset. If
an inlay is correctly inset, this part of the Front
Cabinet only moves a little. If not, it moves widely.
3. Inset the inlays in the order as shown below.
Insetting in the wrong order will bend the Front
Cabinet, which results that all inlays cannot be
inset correctly.
2
3
4. Inset the inlays to the Rear Frame by applying
appropriate force to the aperture.
Rear Frame cut and raised portions
NG
1 2
3
5. After assembling, check from the rear of the set
that the inlays are correctly inset.
Front Cabinet
1
Inlay
Cross-section of an inlay
OK
Rear view of the set
OK
4-11
2
Inset the inlays into
the Rear Frame by apply
appropriate force
to the aperture.
Rear Frame
NG
NG
PL17.06-A_DC