Subscribe to Our Youtube Channel
Related Manuals for Humboldt H-3185SD
Summary of Contents for Humboldt H-3185SD
- Page 1 H-3185SD CONTROLLER OPERATING INSTRUCTIONS Version 1.0.0 5.20.2008 H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing...
-
Page 2: Table Of Contents
The Default IP settings of the unit are:..............11 Web Browser Interface ....................12 Test Status ......................... 12 Test Data........................12 Test Setup ........................12 Administration ......................12 H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing... -
Page 3: Introduction
• Previous test data can be reviewed, which includes tabulation and graph views. • Export test data to PC using Windows Hyper Terminal or using the Humboldt IR download software. • Connect to the Freeze-Thaw cabinet remotely for control and/or observation. -
Page 4: Nitial Controller Etup
6. The main circuit breaker is located on the side of the controller box near the door latches. Switch the breaker to the ON position. 7. Wait for the controller to initialize, after initialization you should be ready begin using your freeze/thaw machine. H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing... -
Page 5: Controller Screens And Navigation
- Use this to adjust the desired time to freeze or thaw. Time is entered in minutes. Number of Cycles Number of Cycles - Set the number of cycles the test will run. H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing... -
Page 6: Adjusting Values
Temperature Range: 0ºF (-17.8ºC) for Freeze and 40ºF (4.44ºC) for Thaw Temperature Hold: 0 minutes for Freeze and 0 minutes for Thaw Freeze-Thaw Duration: 90 minutes for Freeze and 150 minutes for Thaw Number of Cycles: 25 cycles H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing... -
Page 7: Test Screen
Note: Multiple tests cannot be stored on the unit. Only one test at a time can be stored at a time. After each test you can export your data. H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing... -
Page 8: Previous Test Screen
Table button to get back to the table view. Export Press the Export button to export the data to Windows Hyper Terminal or Humboldt IR Download. If using Humboldt IR Download please refer to the IR Download instructions for Exporting data. COM Port Settings Use these settings if exporting to Hyper Terminal or similar program. -
Page 9: Controller Settings
ONTROLLER CREENS AND AVIGATION ONTINUED Controller Settings This section will describe the various settings of the H-3185SD controller. From the main screen press the button. SETUP Setup Screen 1 SCREEN Set screen contrast - Change the screen contrast here. TIME System Time - Change the system time here. -
Page 10: Setup Screen 2
On this screen you will also see the current temperature of the freeze/thaw cabinet. About Screen This screen displays information about the unit as well as what the units current IP address is. From the main screen press the button. About H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing... -
Page 11: Tcp/Ip
ETTINGS AND NTERFACE The H-3185SD can be controlled remotely. This includes starting/stopping tests, viewing current status of unit, changing IP address of unit, and viewing test data. An Ethernet cable must be plugged into your local network to access these features. -
Page 12: Web Browser Interface
Administration From this page you can view/change the IP settings of the unit. Note: Settings cannot be changed if a test is running. H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing... - Page 13 ERVICE For any service issues, contact Humboldt Scientific, Inc. Phone 1.800.537.4183 between 8:00 AM and 5:00 PM Eastern Time. H-3185SD C ONTROLLER PERATING NSTRUCTIONS © 2007 Humboldt Manufacturing...
Need help?
Do you have a question about the H-3185SD and is the answer not in the manual?
Questions and answers