Table of Contents
Advertisement
AHS262
1.
Check idle speed and reset if
necessary. If a tachometer is
available, idle speed screw (A)
should be set to the
specifications found on
"Specifications" page of this
manual. Turn idle screw (A)
clockwise to increase idle
speed; counterclockwise to
decrease idle speed.
Lubrication
Blades
Level 1.
Parts Required: 20W engine oil for blade lubrication, 50-50 mixture of
kerosene and 20W oil for blade cleaning.
Hedge Trimmer blades are very sharp. Touching them may lead
to severe personal injury. Avoid touching blades whenever
possible, and always wear gloves to protect hands.
1.
Brush loose debris from blade
and coat both sides of blade
with the 50-50 cleaning mixture.
2.
Allow cleaning mixture to soften
the remaining gummy residue
then wipe it from the blade.
3.
Apply clean oil to the entire length of the blade. Be certain the blade
bolts are lubricated.
4.
Wipe excess oil from the blade before putting the unit back in service.
X7502342403
© 08/21 ECHO Incorporated
MAINTENANCE
A
A
37
Advertisement
Table of Contents
