Shindaiwa AHS262 Operator's Manual page 12

SAFETY
Read the Manuals
• Provide all users of this equipment with the Operator's Manual and Safety
Manual for instructions on Safe Operation.
Clear the Work Area
• Spectators and fellow workers must be warned, and children and animals
prevented from coming nearer than 15 m (50 ft.) while the unit is in use.
Keep a Firm Grip
• Always hold throttle handle and support handle with thumbs and fingers
tightly encircling the handles.
Keep a Solid Stance
• Maintain footing and balance at all times. Do not stand on slippery,
uneven or unstable surfaces. Do not work in odd positions or on ladders.
Do not over reach.
Cutting Angle Adjustments
• Only adjust cutting blade angle
with unit flat on the ground, with
the engine stop switch in the
"STOP" position. Never adjust
cutting angle with unit standing
upright.
Avoid Contact With Gear Box Assembly During Use
• Gear box assembly becomes hot during use. Avoid
contact with gear box assembly when using unit or
making cutting angle adjustments.
Avoid Hot Surfaces
• Keep exhaust area clear of flammable debris. Avoid contact during and
immediately after operation.
12
AHS262
X7502342403
© 08/21 ECHO Incorporated