Operation - Shindaiwa AHS262 Operator's Manual

OPERATION

3. Slide cutter assembly (C) onto
drive shaft assembly (D). Be
certain the flexible drive shaft
engages the hole in the driver
gear.
Align locating hole in gear
4.
housing with locator hole in
drive shaft.
5. Install the locating bolt and
tighten the clamping bolt.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face
and body.
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.
18
D
© 08/21 ECHO Incorporated
AHS262
C
X7502342403