Download Print this page

Canon Smart Base MP730 Circuit Diagrams page 8

Advertisement

c) JUMPER TERMINAL SYMBOL
Jumper terminal symbols are as shown below.
d) UNMOUNTED PART SYMBOL
Parts marked with ### are not mounted on the PCB.
1.2 INDEX
Each circuit diagram has an index, like the one shown here, on the lower right
hand side.
No.
No.
REMARKS
DRAWING NAME
DRAWING No.
MODEL NAME
PART No.
REV.
Connected Jumper Terminal
###
Disconnected Jumper Terminal
Figure 3 Jumper Terminal Symbol
# # #
JP328
<F. A.>
<MODE>
SW330
Figure 4 Unmounted part Symbol
REMARKS
Figure 5 Index
: Number of modification to this manual
: Modification content
: Name of circuit diagram
: Drawing number of this diagram
: Name of model corresponding to Part No.
: Service part number of relevant board in this circuit
diagram
: Version number indicating revision of this diagram
SW330 is not mounted on the PCB.
SW340
DRAWING NAME
DRAWING No.
REMARKS
2
PATR No.
REV.

Advertisement

loading