ATTACHING THE AIR PURIFYING FILTERS
CAUTION
!
Cleaning and maintenance must be carried out only by qualifi ed service personnel. Before cleaning, stop
operation and switch off the power supply.
1
Open the front panel.
Pull up the front panel by holding it at both sides with
●
both hands.
2
Remove the pre-fi lter.
Push upward to release the claws and pull out the
●
pre-fi lter.
3
Attaching the air purifying fi lters.
Attach the air purifying fi lters to the frame by gently
●
compress its both sides and release after insertion
into pre-fi lter frame.
!
Do not bend the air purifying
fi lter as it may cause damage to
the structure.
4
Attach the pre-fi lters.
Attach the pre-fi lters by ensuring that the surface
●
written "FRONT" is facing front.
After attaching the pre-fi lters, push the front panel at
●
three arrow portion as shown in fi gure and close it.
NOTE
In case of removing the air purifying fi lters, please follow the above procedures.
●
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air
●
purifying fi lters are used. So, set the fan speed to "HIGH" when using it in this condition.
Do not operate the air conditioner without pre-fi lter. Dust may enter the air conditioner and fault may
●
occur.
CAUTION
Claws
(4 places)
– 24 –