Using The Mail Notification Function To Report Problems - Epson PowerLite 1830 Operation Manual

Using the Mail Notification Function to Report Problems

Using the Mail Notification Function to Report Problems
By setting the Mail Notification function from the projector's
Configuration Menu, notification messages will be sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
• Up to a maximum of three notification destinations (Addresses) can be
q
recorded, and notification messages can be sent to all three destinations at
once.
• If a projector develops a critical problem and suddenly stops working, it
may not be able to send a message notifying an operator of the problem.
• Monitoring is possible if Network On is set from the Extended menu of the
projector's Configuration Menu, even if the projector is in Standby Mode
(when the power is off).
45