Adjusting The Height Of The Image; Focusing And Zooming The Image - Epson PowerLite 1825 User Manual

The Projector and Notebook Don't Display the
Same Image
If you're projecting from a notebook, and you can't see your
image on the projection screen and on your computer at the
same time, follow these guidelines:
If you're using a PC notebook:
❏ On most systems, there's a function key that lets you toggle
between the LCD screen and the projector, or display on
both at the same time. It may be labeled
an icon such as . You may have to hold down the
key while pressing it. Allow a few seconds for the projector
to sync up after changing the setting.
❏ If the function key doesn't permit you to display
simultaneously on both screens, you should check your
monitor settings to make sure both the LCD screen and the
external monitor port are enabled.
From the Control Panel, open the
Display Properties dialog box, click the
click . The method for adjusting the settings
Advanced
varies by brand; you may need to click a
make sure the external Monitor port is set as your primary
display and/or enabled. See your computer's documentation
or online help for details.
If you're using Mac OS X:
You may need to set up your system to display on the projector
screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
®
click
Displays.
2. Select or
VGA Display
, and make sure
Arrangement
Adjusting the Image
Once you see your image, you may need to make certain
adjustments, as described in this section.
CRT/LCD
utility. In the
Display
tab, then
Settings
tab, then
Monitor
System Preferences
, click
Color LCD Arrange
is checked.
Mirror Displays

Adjusting the Height of the Image

If the image is too low on the screen, you can use the front
adjustable foot to raise it.
1. Stand behind the projector. Press the foot release lever and
lift the front of the projector.
or have
Fn
2. Once the image is positioned where you want it, release the
lever to lock the foot in position.
3. If necessary, you can fine-tune the height or level the image
by turning any of the projector's adjustable feet.
, then
Raising the projector causes the image to distort or "keystone,"
but you can correct the shape as described on page 6.
or

Focusing and Zooming the Image

To sharpen the image, turn the focus ring on the projector.
To reduce or enlarge the image, turn the zoom ring on the
projector.
If the image still isn't large enough, you may need to move the
projector farther away from the screen. You can also use the
buttons on the remote control to zoom in on a portion
E-Zoom
of the image. See page 8 for instructions.
2/08
Focus
PowerLite 1825
Zoom
5