Maintenance Schedule - NTC VD12P Operation Manual

7. MAINTENANCE SCHEDULE

This maintenance schedule contains only the most important operations. Besides of these operations, carry out maintenance and repairs of the machine as necessary
depending on the respective conditions of operation. Check also the engine operation manual.
WARNING:
Turn off the engine before any maintenance or repair activity.
Use genuine spare parts only. Use of non-original spare parts may lead to damage to the machine. The manufacturer will not honor any warranty claim
arising from such reason.
Item Operation
Engine oil Inspection of oil level
Exchange
Air filter Inspection
Cleaning
Spark plug Inspection - cleaning
Filter bowl Cleaning
Fuel hose Inspection - exchange
Valve clearance Inspection - adjustment
Fuel tank and sieve Cleaning
Vibrator Inspection of oil level, exchange
Drive belt (3) Tensioning
Rubber mounts Inspection of the integrity
Handle assembly Lubrication, exchange
1. To be carried more often when operating in dusty environment!
2. It is recommended to be carried out by authorized service.
3. Replacement of drive belt every 300 hours.
4. Bolt connections – check after approx. 100 working hours, if any gets loose, apply the glue and tighten the bolt.
Initial inspection After 1st month or 20


Inspection for tightness - daily
Every 3 months or 50
hours hours
DAILY

 (1)
Every two years
Every 12 months or 250 hours (2)
Every 12 months or 300 hours (2)
Oil replacement - every 2 years

Every 6 months or
100 hours



150 hours
