Epson MovieMate 72 Quick Manual page 7

■
MovieMate doesn't have to be directly in
front of the screen or wall, but it has to face
straight ahead (at a 90-degree angle to the
surface).
■
If the image is too low, too high, or off to
the side, you can use the quick image
adjustment dials to adjust the position (see
page 10 for instructions).
■
The farther you place MovieMate from the
screen or wall, the larger the image will be.
If you want an 80-inch diagonal widescreen image, place MovieMate about
6.4 feet away from the wall or screen. The following diagram shows the
approximate image size (measured diagonally) at various distances.
Caution:
MovieMate should not be exposed to water, smoke, moisture, dust, direct heat or
sunlight, or left outside for long periods of time. These environmental factors may
cause damage to internal electronics over time. See the warranty on page 19 for
additional details.
Unpacking and Setting Up
7