Download Print this page

Advertisement

Quick Links

KEH067A41E, KEH063A4E(A), FTDBHMS,
FTDBHML
INSTALLATION IN
STRUCTIONS
Safety Considerations
Read these Safety Considerations carefully before
installing the drain pan heater. After completing the
installation, check if the unit operates properly during the
start-up operation.
Meaning of DANGER, WARNING, and CAUTION symbols
DANGER
Indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
DANGER
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
DANGER
Indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury.
It may also be used to alert against
unsafe practices.
Inform users that they should store this installation
manual for future reference.
After completing the installation, make sure that the
unit operates properly during the startup operation.
All phases of the field-installation, including, but not
limited to, electrical, piping, and safety, must be done in
accordance with manufacturer's instructions and must
comply with national, state, provincial, and local codes.
This product is a heater designed to melt snow that is
blown into the product from the outside to prevent the
drain pan of the outdoor unit from freezing.
Install the product with a snow-break hood on a high
stand if this product is used in heavy snow areas.
IOD-7133
01/2021
Our continuing commitment to quality products may mean a change in specifications without notice.
©2021
19001 Kermier Rd., Waller, TX 77484
Only personnel that have been trained to install, adjust, service
or repair(hereinafter, "service") the equipment specified in this
manual should service the equipment. The manufacturer will not
be responsible for any injury or property damage arising from
improper service or service procedures. If you service this unit,
you assume responsibility for any injury or property damage
which may result. In addition, in jurisdictions that require one or
more licenses to service the equipment specified in this manual,
only licensed personnel should service the equipment.
Improper installation, adjustment, servicing or repair of the
equipment specified in this manual, or attempting to install,
adjust, service or repair the equipment specified in this manual
without proper training may result in product damage, property
damage, personal injury or death.
Do not touch the heater unit without wearing gloves.
The temperature of the heater unit will become high when the
heater is turned on. Touching the heater unit with bare hands will
result in burns or injury.
Wear protective gloves at the time of installation.
Touching the suction mouth or aluminum fin of the outdoor unit
may result in injury.
Do not install the product in places where there is danger of
exposure to inflammable gas leakage.
If the gas leaks and builds up around the unit, it may catch fire.
Do not grab the top plate of the outdoor unit carelessly when
removing the top plate.
The sharp edge of the top plate may cause injury.
Do not install the outdoor unit in places where small animals
may nest in the outdoor unit.
If small animals intrude and touch the internal parts of the outdoor
unit, the outdoor unit may malfunction, generate smoke, or ignite
Advise the user to keep the place clean.
Do not touch the heater unit with bare hands.
The temperature of the heater unit will become high when the
heater is turned on.
Touching the heater unit with bare hands may result in burns or
injury.
FOR CALIFORNIA CONSUMERS
www.daikincomfort.com
INSTALLATION INSTRUCTIONS
WARNING
DANGER
WARNING
PROP 65 WARNING
WARNING
Cancer and Reproduc�ve Harm
www.P65Warnings.ca.gov
-
0140M00517-A

Advertisement

loading
Need help?

Need help?

Do you have a question about the KEH067A41E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Daikin KEH067A41E

  • Page 1 INSTALLATION INSTRUCTIONS KEH067A41E, KEH063A4E(A), FTDBHMS, WARNING FTDBHML Only personnel that have been trained to install, adjust, service INSTALLATION IN or repair(hereinafter, “service”) the equipment specified in this STRUCTIONS manual should service the equipment. The manufacturer will not be responsible for any injury or property damage arising from improper service or service procedures.
  • Page 2: Tools Required

    Install covers over the wires. Incomplete cover installation could result in terminal overheating, an electric shock, or fire. ACCESSORIES Read these Safety Considerations carefully before installing the drain pan heater. After completing the installation, check if the unit operates properly during the start-up operation. KEH067A41E KEH063A4E KEH063A4EA FTDBHMS...
  • Page 3: Installation Procedure

    INSTALLATION PROCEDURE WARNING Be sure to check that the power supply of the product is turned off. Some stages in the installation procedure differ by model of the outdoor unit. Refer to the instructions for the relevant model. TYPE A MODELS: RX09/12NMVJU, RX09/12AXVJU,RXN09/12, RXL09/12 TYPE B MODELS: RX18/24NMVJU,RXN18/24, RXL15 TYPE C MODELS: 2/3/4MXS,2/3MXL TYPE D MODELS: RX18/24AXVJU...
  • Page 4 For Type B and C Models 2. Remove the fan motor base. 1) Remove the fixing screws at the lower section of the fan motor base. (2 screws) 2) Remove the fan motor base together with the propeller fan and ensure that stress is not placed on the propeller fan when placing them aside, •...
  • Page 5 3. Install the drain pan heater. CAUTION When drilling a hole, be careful not to damage the soundproofing material and other components on the back side. 1) For type D models, exchange the pre-mounted mounting plates for 2 of the alternate mounting plates as indi- cated below: Remove pre-mounted...
  • Page 6 For Type A Models Location and number of holes Bottom frame: 2 Plate (Insert the plate under the heat exchanger.) Heat exchanger View D Hole Bottom frame Drain pan heater Ground plate Hole (Fix with the M4 piercing screw.) (The ground plate should be installed View C...
  • Page 7 4. Route the harnesses. CAUTION When drilling a hole, be careful not to damage the soundproofing material and other components on the back side. For type A Models 1) If there is no hole, drill a ɸ1/8 inch (ɸ3.2mm) hole in the partition plate. (1 location) 2) Fix in place the binding band attached to the drain pan heater harness by screwing the M4 piercing screw...
  • Page 8 For type D Models Route wire as shown Sealing material 5. Connect the terminals of the drain pan heater to the terminal block of the outdoor unit. 1) Connect the thermostat-side terminal (black harness) to the leftmost terminal and the heater-side terminal (white harness) to the second leftmost terminal.
  • Page 9 For type A Models View E Heater-side terminal Thermostat- (white harness) side terminal (black harness) Binding band For type B and D Models View E Heater-side Thermostat- terminal side terminal (white harness) (black harness) Binding band For type C Models Heater-side terminal (white harness) Thermostat-side...
  • Page 10 this page intentionally left blank...
  • Page 11 this page intentionally left blank...
  • Page 12 CUSTOMER FEEDBACK Daikin is very interested in all product comments. Please fill out the feedback form on the following link: https://daikincomfort.com/contact-us You can also scan the QR code on the right to be directed to the feedback page. Our continuing commitment to quality products may mean a change in specifications without notice.

This manual is also suitable for:

Keh063a4eKeh063a4eaFtdbhmsFtdbhml