Bacci MASTER Use And Maintenance Instruction Manual page 166

5.12 Machining check
DANGER!
Safety
Danger of flying pieces or tool parts.
warning
A wrong piece programme or a programme applied to a piece that has not been
blocked properly may result in the tool breaking and tool fragments flying free.
Check the machining programme before starting production.
After the machine has been equipped, the operator running the machine must check that the work cycle
proceeds correctly. Usually, verification in original conditions is the most efficient. The only difference
with respect to the definitive cycle is that the operator holds the portable pushbutton panel in his/her
hand and reduces machining speed using the potentiometer, in order to be able to intervene quickly in
case of programming or equipment errors, etc.
CHAPTER 5 – Controls and Use of the machine
NOTE
Chap. 5
- 51
/62 -