Table of Contents
Advertisement
DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Client
On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access
point or to a WISP.
To configure the router as a client, move the Enable switch to the right. Upon that the following
fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4 GHz
Connecting to network
Figure 107. The page for configuring the client mode.
If the switch is moved to the left, devices cannot connect to the
router's WLAN. Upon that the router can connect to another access
point as a wireless client.
A method for connecting to another access point.
Page 134 of 236
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
