D-Link DIR-620S User Manual page 100

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Parameter
Keep Alive
Dial on demand
PPP IP extension
PPP debug
Figure 81. The page for creating a new
Parameter
Get IPv6
Gateway by SLAAC
Move the switch to the right if you want the router to
connected to your ISP even when the connection has been inactive
for a specified period of time. If the switch is moved to the right, the
LCP interval and LCP fails fields are available. Specify the
required values.
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
This option is used by some ISPs. Contact your ISP to clarify if this
option needs to be enabled. If it is required, move the switch to the
right.
Move the switch to the right if you want to log
connection debugging.
PPPoE Pv6
IPv6
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
Move the switch to the right to automatically assign the IPv6
gateway address with help of SLAAC (Stateless Address
Autoconfiguration).
Page 100 of 236
Configuring via Web-based Interface
Description
connection. The IPv6 section.
Description
keep you
all data on PPP