Table of Contents
Advertisement
DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Parameter
Method of channel auto
select
Beacon period
RTS threshold
Frag threshold
DTIM period
Station Keep Alive
When you have configured the parameters, click the APPLY button.
A method of automatic channel selection.
BSS (by signal level) (Basic Service Set): When this value
•
is selected, the router analyzes the signal levels of the
neighboring wireless networks and selects a channel with the
minimum value of the total level of interference from these
networks.
FA & CCA (by volume of data transmitted) (False
•
Alarm and Clear Channel Assessment): When this value is
selected, the router analyzes the volume of data transmitted
in the neighboring wireless networks and selects a channel
with the minimum value of the total number of packets
transmitted in these networks upon scanning them.
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
The minimum size (in bytes) of a packet for which an RTS frame is
transmitted.
The maximum size (in bytes) of a non-fragmented packet. Larger
packets are fragmented (divided).
The number of beacon frames between sending DTIM messages
(messages notifying on broadcast or multicast transmission).
The time interval (in seconds) between keep alive checks of wireless
devices from your WLAN. When the value 0 is specified, the
checking is disabled.
Page 140 of 236
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
