Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Samyung N80
Summary of Contents for Samyung N80
- Page 1 User Guide...
- Page 2 ⑧o④ ⑥ill need ③o ①epea③ ③he p①oce②②. If ③oo d①⑧, ③he ③i②②④e ⑥on ③ glide easily, and may damage the surface. If you require technical advice or assistance, contact your nearest samyung enc office or visit our website, www.samyungenc.com.
-
Page 3: Table Of Contents
3-4-3 Chart scale ..................27 3-14-1 Distress ................... 49 3-4-4 NAVIONICS Search ................27 3-14-2 Poll ....................51 3-4-5 SAMYUNG Map Search................ 28 3-4-6 Symbols and information ..............28 3-15 Navtex ...................... 51 3-4-7 Introduction to navigating ..............28 3-16 Engine Faults .................... 51 3-4-8 Going to a waypoint or to a point on the chart ........ - Page 4 4-2-7 Map shift ................... 55 4-9-1 Simulate ................... 64 4-2-8 Restore default .................. 55 4-9-2 Waypoint ..................64 4-9-3 GPS ....................64 4-3 Sonar settings ................... 56 4-9-4 Video ....................64 4-3-1 Frequency ..................56 4-9-5 Units....................64 4-3-2 Palette ....................56 4-9-6 Comms.
-
Page 5: Introduction
Size 201mm(H) x 293mm(W) x 92mm(D) 1-2 Specification Display 8 inch, TFT color, 800X600 pixel Supply Voltage 11 ~ 36 V DC [N80] Supply Current 24V (Equipment Only) 24V (Equipment Only) Maximum LCD Brightness 700mA Maximum LCD Brightness 1.73A GENERAL Minimum LCD Brightness 330mA Minimum LCD Brightness 1.32A... -
Page 6: Components
0m ~ 600m (600W) / 0m ~1000m (1KW) Output of transducer Power : it is variable and maximum 1KW RMS NF80 NF80-1KW Can use 2 frequency (50 kHz, 200 kHz) Display N80-K NF80-K NF80-1KWK Temperature Range : 0° ~ 37.7°C (32°F ~ 99.9°F) Bracket N80-DB Cover N80–CC... -
Page 7: Getting Started
2-2 Buttons 2 Getting Started [FRONT] 2-1 Installation The chart plotter is supplied with bracket and flush mounting kit. You can choose a method of installation according to your preference. 2-1-1 Bracket Mounting Find the appropriate place to install considering GPS Chart plotter’s weight and user convenience. - Page 8 [REM-3D] ① ⑤ ② ③ ④ ⑥ ⑦ Press F1 once goes to Plotter ( press it consecutively and will show Plotter and low frequency( press again and will show plotter and high frequency( press again and will show plotter and dual frequency( press again for low frequency ( high frequency( dual frequency then it will go back to Plotter Under multi display, when you press it, it goes to multi display menu, and enables you to adjust the display.
-
Page 9: Navionics Sd Card, Usb
3 Move the cursor key to select the data field You may choose to display one map from 2 you wish to change and press (NAVIONICS, SAMYUNG MAP) NAVIONICS SD Card is 4 Select Data type. optional, and is not supplied Follow the instruction for selection of map. -
Page 10: Compass
2-7 Compass 2-8 Multi Window Display The chart plotter computes compass direction To turn the compass off and on Chart plotter can display up to four windows Changing window size from the constellation of GPS satellites. It is 1 Press and select Data bar. -
Page 11: User Line Drawing
2-9 User Line Drawing Active window The user may draw a line or set the Mark Up to 999 Lines, marks, characters could be If more than one windows are displayed, the active window has blue border around it. If you using this function. -
Page 12: General Operation
3 General Operation 3-3 Main window To display the one window from the main page, press and select function you wish to 3-1 Power on and off show. Power on Power off Press and hold until the display shows Press and hold . -
Page 13: Chart
Echo Sounder Chart Video 3-4 Chart Chart window shows all the navigational relevant data of S-MAP and NAVIONICS (buoys, lights, cables, depth sounding, marinas, tide station) 3-4-1 Chart Window To go to the Chart window: Data bar. You may change the data Press and select Chart icon. -
Page 14: Latitude And Longitude
This function is available when it has been Latitude: The angular distance north or south data bar. set for SAMYUNG map to be displayed. from the equator of a point on the earth’s In the data bar, vessel’s position will show as To find port &... -
Page 15: Going To A Waypoint Or To A Point On The Chart
3-4-10 Distance and bearing calculator The unit can show the bearing and the length Saving route 3-4-8 Going to a waypoint or to a point on the chart of leg and the total distance of legs. 1 Set all the legs then press and select A waypoint is a particular location on a Cancelling Navigating... -
Page 16: Finding A Chart Symbol
3-4-12 Finding a chart symbol 3-4-14 3D MAP From the chart, when you hold down to Pressing the shows the menu to allow ▣ When you wish to create mark, adjust color , the Mark window will show. you to set 3D map and shape, Press down WPT from Plotter From Mark: select the symbol of mark display. -
Page 17: Sonar
3-5-1 Option Movie option External video option When you press , option displays 3-6 Sonar Open: Opens the file from SD card and When you press option displays. Input: You may select from composite-1, USB.(shortcut: It is possible to use the Sonar function when it is connected to the transducer. composite-2, S-VIDEO. -
Page 18: Single Or Dual Frequency Fish Finding
3-6-3 Single or Dual Frequency Fish finding [When the set depth is too low] [When the set depth is too high] Sonar frequencies The display is useful for comparing the same The unit has dual frequency, 200kHz and picture with two different frequencies. 50kHz to detect various bottom conditions. -
Page 19: Sonar Window Display
3-6-8 Split zoom and Full Screen zoom Split zoom Bottom lock 3-6-6 Sonar window display Split zoom mode expands selected area of If Bottom lock is on, the zoom depth (the Five sonar display windows are available and Split A-Scope: Display Sonar history and the single frequency by VRM(Variable Range depth of the zoom section) is adjusted each display window has unique... -
Page 20: Split 50/200
3-6-10 Split 50/200 3-7 Highway The 50 kHz display appears on the left and the 200 kHz appears on the right. This dual The Highway window shows a 3D view of frequency display is very useful for the vessel traveling through the water when comparing the same scanning with two navigating to a destination point. -
Page 21: Waypoints
3-9-4 Deleting a waypoint To delete a waypoint from the Deleting a waypoint from the waypoints 3-9 Waypoints chart window window 1 Move the cursor to the waypoint 1 Move cursor key to highlight a waypoint you A waypoint is a particular location on a you want want to delete. -
Page 22: Routes
3-10-2 Managing a route from the route window 3-10 Routes Creating a rout from the route window Deleting a waypoint in the waypoint list 1 To go to the Route window, press 1 Highlight a waypoint you want to delete in A trip from one place to another often the waypoint list. -
Page 23: Satellites
- Today: automatically set the date of Tide height. today. - Next day: automatically set the date of In case of SAMYUNG MAP is today. already set, it - Prev day: automatically set the date of (Please refer to 2-4 how to... -
Page 24: Ais
3-13 AIS AIS is an Automatic Identification System for identification and localization of boat. AIS provide [AIS Vessel Information -1] [AIS Vessel List] a means for boats to exchange and share boat data including identification, position, course, etc. This information can be displayed on the screen of you unit. AIS is intended to assist you to monitor other boats movements to improve safety and prevent collision. -
Page 25: Dsc
3-14-2 Poll 3-14 DSC Poll Deleting a poll A compatible radio with the unit can request 1 Highlight a received distress call you want This feature requires connection to optional DSC VHF radio. the position of other DSC VHF radio equipped to delete. -
Page 26: Navtex
4 Settings 3-15 Navtex NAVTEX is an international automated direct Deleting a message printing service for delivery of navigational 1 Move the cursor to a message you want to The system menu mainly consists of settings which do not require frequent adjustment. To go to system menu, press and hold then select the icon you want. -
Page 27: Chart Settings
4-2-1 Rotation Projected course: Display the Projected course in given set time. Three types of display presentations are 4-2 Chart settings CDI scale: Set CDI (Course Deviation provided. The default is heading up. North up: North is at the top of the display. Indicator) scale which is a parallel line on To go to the chart settings: either side of the pottered course. -
Page 28: Map Datum
on or off 4-2-7 Map shift 4-3 Sonar settings Restricted Area: Turns the displaying of Sometimes current position of own ship does Restricted area on or off not match with the current location on the Sonar feature requires a connection to depth transducer. Fishing Area: Turns the displaying of chart. -
Page 29: Gps Settings
4-4 GPS Settings 4-5 Track & Log Settings To go to the GPS settings: 1 Press and hold To go to the tracking and long settings: 2 Select the GPS icon. 1 Press and hold 2 Select the track & log icon. The unit has the capability to store 10 individual tracks and record up to 15,000 track points. -
Page 30: Memory Settings
4-6-4 Format 4-6-5 Screen Snap Shot Erase all data in the user card. Format the To take the snap shot of current screen, press 4-6 Memory Settings user card before using it. twice. To save the captured image, press and select Save or Save all to save To go to the memory settings: the captured images on the user card. -
Page 31: Display Filter
4-7-1 Display Filter There are a couple of methods to filter AIS Filter by speed : Vessels with speed below 4-8 Alarm Settings vessel in this unit as below. the set value are filtered. Filter by Type : The type of vessel which is Show Dangerous Only : When this option Press long then select Alarms:... -
Page 32: Other Settings
4-9-1 Simulate Simulate :Turn the simulate mode on or off. 4-9-8 Time 4-9 Other settings Mode : See 2-5 Simulate Mode. Local offset : The time information supplied Speed : The simulated boat speed to use. by the GPS satellites is in UTC (Universal Press long then select Others: Course : The simulated course over ground. -
Page 33: Connections
[Number of Connector Pin] 5 CONNECTIONS Accurate installation highly affects the performance of this equipment. You must read the manual on installation, antenna and other equipment information before installation process. For information on the additional equipment, contact SAMYUNGENC and check. 5-1 OPTIONAL PART •... -
Page 34: Connection
[DATA] 5-2 CONNECTION Number Description of pin GPS Chart plotter has the connection device to connect with the NMEA equipment like power DGPS_OUT supply, GPS antenna, AIS receiver, auto pilot device and digital equipment. +12V *Warning: Check that the power supply cable does not get connected to the +12V GND REMOTE Connector or the DATA connector. -
Page 35: Gps Antenna
paddlewheel, speed, temperature, depth of 5-5 GPS ANTENNA water from the optional equipment. • Equipment may receive information from Selection of antenna optional GPS or DGPS. Install one of the GPS antennas from below. 5-5-1 External antenna Internal GPS antenna’s reception is affected 5-7 DATA by the place where equipment gets installed. -
Page 36: Dgps/Nmea Antenna
5-7-1 DGPS/NMEA ANTENNA 5-7-2 NMEA2000 5-8 MEDIA You can connect several equipment to one NMEA 2000 regulation has been implemented external GPS by receiving the GPS data in the for communication between navigational form of NMEA from external equipment. You may use CCTV, S-VIDEO, external speaker, microphone map, navigation, engine, tank level sensor •... - Page 37 3-4-1 Map display 3-14-2 Poll 3-4-2 Longitude and Latitude 3-4-3 Chart Scale 3-15 NAVTEX 3-4-4 NAVIONICS Search 3-16 Engine error 3-4-5 SAMYUNG MARP Search 3-5-6 Symbol and information 4. Settings 4-1 System Setting 4-1-1 Language setting 3-4-7 Navigational information 4-1-2 Map setting...
- Page 38 4-3 Sonar setting 4-3-1 Frequency 4-9 Other setting 4-9-1 simulation 4-3-2 Palette 4-9-2 Waypoint 4-3-3 Scroll Speed 4-9-3 GPS 4-3-4 Font Size 4-9-4 Units 4-3-5 Fish 4-9-5 Comms 4-3-6 Advance setting 4-9-6 Time 4-3-7 Restore default 4-9-7 Restore default 4-4 GPS Setting 4-4-1 GPS Source 5.
- Page 39 The position value error is large Check if datum has been selected to WGS84 . ※ Always update the electronic chart (Samyung Map) If you have set latitude, longitude, correction function, set the value back to 0. Vessel s speed value error is large...
- Page 40 N80/NF80 Installation 1. If not connected to AIS, Autopilot, DGPS (Interconnect to the Power Cable 8P) POWER CABLE (8P) GNB-400S 3. TX(WHITE) RX(BLUE) 4. RX(BLUE) TX(YELLOW) 7. GND(YELLOW) GND(WHITE) POWER EXT Power+RED DC+10~36V EXT Power-BLACK 2. When two equipment AIS and Autopilot are connected (Interconnect to the Data...
- Page 41 1 YEAR WARRANTY Thank you for purchasing an SAMYUNG ENC product. This product has been thoroughly checked and is covered by the Samyung ENC’s warranty for defects in materials and workmanship under normal use from the date of purchase. This warranty provides for the free repair or replacement of defective parts from our Samyung ENC authorized dealer.
- Page 42 User Guide...
Need help?
Do you have a question about the N80 and is the answer not in the manual?
Questions and answers