Download Print this page

Vaniman SANDSHELL Original Instructions Manual

Micro abrasive blaster

Advertisement

Quick Links

CAUTION:
1. CONDITIONS FOR USE
This micro abrasive blaster may only be operated:
• Indoors;
• Below 1981 m (6500 ft) above sea level altitude;
• Ambient air temperature between 40°-105°F (5-40°C);
• Maximum relative humidity of 80% at 31°C (88°F);
• Power supply current fluctuations does not exceed 10% of nominal value;
• Under level 2 contamination conditions;
• Supply cool, dry air only, at a maximum pressure of 10.3 Bar (150 PSI).
2. SAFETY
WARNING:
with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
BATTERY-operated (cordless) power tool.
1.
Work area safety:
a.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c.
Keep children and bystanders away while operating this power tool. Distractions can
cause you to lose control.
2.
Electrical Safety:
a.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed
or grounded.
c.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
25799 Jefferson Ave.
Murrieta, CA 92562
ORIGINAL INSTRUCTIONS
Read the instructions before using this equipment
Read all safety warnings, instructions, illustrations and specifications provided
1-800-VANIMAN (826-4626)
SANDSHELL
ENGLISH
www.vaniman.com
sales@vaniman.com
SANDSHELL - 05/21 Page 1

Advertisement

loading

Summary of Contents for Vaniman SANDSHELL

  • Page 1 Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 25799 Jefferson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) www.vaniman.com sales@vaniman.com     SANDSHELL - 05/21 Page 1...
  • Page 2 Such preventive safety measures reduce the risk of starting the power tool accidentally. 25799 Jefferson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) www.vaniman.com sales@vaniman.com     SANDSHELL - 05/21 Page 2...
  • Page 3 • Maintain equipment and accessories. Check for breakage of parts and any other condition that may affect the equipment’s operation. 25799 Jefferson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) www.vaniman.com sales@vaniman.com     SANDSHELL - 05/21 Page 3...
  • Page 4: Liability Exclusion

    4. LIABILITY EXCLUSION Vaniman Manufacturing shall be absolved from all claims for damages and warranty if: • The product is used for any purpose other than it was designed for.
  • Page 5: Packing List

    5 cfm at 60 to 80 psi. 6. Turn on the light by turning the knob on the right side of the SandShell. 7. Prior to use, make sure the viewing window is securely locked, with the arrow pointing down.
  • Page 6 Place one edge on blaster window and progressively lie shield on glass taking care to minimize bubbles and wrinkles. The correct side of the shield is the side that the Vaniman logo is readable from the front of the blaster.
  • Page 7 Ceramica Embout de projection de Punta Sabbiante in 2725 Steel Blasting Tip Punta de chorreo de acero Stahlstrahlen Tipp l'acier Acciaio 25799 Jefferson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) www.vaniman.com sales@vaniman.com     SANDSHELL - 05/21 Page 7...