Safety Information - Fluke C9970 User Manual

C9970 Voltage Detector
Users Guide

Safety Information

The following IEC symbols are used either on the Voltage Detector or in this
manual:
Warning: Risk of personal injury. See the manual for details.
W
Caution: Risk of damage or destruction to equipment or
software. See the manual for details.
Warning: Risk of electric shock.
X
Earth ground
.
Do not put products containing circuit boards into the garbage.
~
Dispose of circuits boards in accordance with local regulations.
IEC Measurement Category IV. CAT IV equipment is designed to
CAT IV
protect against transients from the primary supply level, such as
an electricity meter or an overhead or underground utility
service.
Complies with North American safety standards
)
To prevent possible electrical shock, fire, or personal injury:

Carefully read all instructions.

Read all safety information before you use the Product.

Use the Product only as specified, or the protection supplied by the
Product can be compromised.

Only qualified personnel who have been trained and are
knowledgeable about the dangers associated with hazardous
voltages should use this product.

Be sure to know and follow your company's procedures for every
application. Any conflict between the procedures specified in this
manual and those of your company must be resolved before using
the Product.

Comply with local and national safety codes. Use personal
protective equipment (approved rubber gloves, face protection, and
flame-resistant clothes) to prevent shock and arc blast injury where
hazardous live conductors are exposed.

Measure a known voltage first to make sure that the Product
operates correctly.
2
W X
Warning