Advertisement
Installation
1
Attaching the mounting unit to the
junction box
Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
NOTE: The pre-installed support screws on the
mounting bracket (AA) should protrude out away
from the junction box.
2
Making the electrical connections
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
Connect the black to black (power), the white to white
(neutral), and copper wire to ground wire with the wire
nuts (CC) and secure the wire nuts (CC) with electrical
tape (not included).
NOTE:
If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
3
Securing the light fixture to the
junction box
Secure the light fixture (A) to the junction box by placing it
over the pre-installed screws on the mounting bracket (AA)
and securing it with the washers (EE) and cap nuts (DD).
AA
AA
A
EE
AA
A
5
Please contact 1-800-986-3460 for further assistance.
BB
CC
DD
HOMEDEPOT.COM/HOMEDECORATORS
Advertisement
