Table Of Contents 2 Installation - Home Decorators Collection HB7087-314 Use And Care Manual

Installation
1
Mounting the hardware

Thread the fixture mounting screws (EE)
into the provided holes of the mounting
bracket (GG).

Thread the hex nuts (BB) onto the fixture
mounting screws (EE). Do not tighten the
hex nuts (BB) at this time.

Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the bracket
mounting screws (DD).

Place the back plate of the fixture body (A)
over the outlet box and onto the fixture
mounting screws (EE).

Adjust the fixture mounting screws (EE)
until they protrude out from the back plate
1/4 in.

Remove the fixture body (A) and secure
the position of the fixture mounting screws
(EE) by tightening the hex nuts (BB)
against the mounting bracket (GG).
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.

Connect the black supply wire to the black
fixture wire using a wire nut (CC).

Connect the white supply wire to the white
fixture wire using a wire nut (CC).

Connect the fixture ground wire to the
supply ground wire using a wire nut (CC).

Wrap all wire connections with electrical
tape for a more secure connection.
DD
EE
BB
A
HOMEDEPOT.COM/HOMEDECORATORS
5
Please contact 1-800-986-3460 for further assistance.
FF
FF
CC