Install Software - Epson WorkForce 30 Quick Start Manual

5

Install Software

Your software works with Windows
Windows Vista , and
®
Windows
1
Make sure the printer is NOT CONNECTED to your computer.
Note:
If you see a Found New Hardware screen, click Cancel and disconnect
the USB cable. You can't install your software that way.
2
Insert the WorkForce 30 Series software CD.
With Windows Vista, if you see the AutoPlay
window, click Run EPSETUP.EXE. When you
see the User Account Control screen,
click Continue.
3
Click Install and follow the on-screen instructions.
4
When you see this screen, click the first option and then click Next,
unless the printer is connected to your computer through an external
print server.
If you're using an external print server, click the second option,
click Next, then skip to step 6.
5
When prompted, connect the USB cable. Use any open USB port on
your computer.
Note:
If installation doesn't continue after a moment, make sure you
securely connected and turned on the printer.
6
When you're done, remove the CD and restart your computer.
You're ready to print! See your Quick Guide or online Epson Information
Center for instructions.
2000, XP, XP Professional x64 Edition,
®
Mac OS X 10.3.9, 10.4.x, and 10.5.x.
®