1-12
|
Setting Up the Printer
Running a Printer Check
You can use the printer check to make sure that your printer is operating
correctly before you connect it to your computer.
1. Turn off the printer.
2. Make sure letter-size (or larger) paper is loaded in the main paper tray.
3. Hold down the
Reset
on the printer. Release the buttons when the P
flashing.
press to run a
printer check
After a few moments, the printer prints one page showing the version of
your printer's ROM, a nozzle check pattern, and the printer's default
settings, as shown below:
4. Press the P
Operate
5. Check the printout.
If the printout looks like the example above, your printer is
•
operating correctly.
1-12
button and press the P
button to turn off the printer.
button to turn
Operate
light begins
Operate