Table of Contents
Advertisement
Power LED
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
WPS button
This button launches the WPS Wizard.
LED On/Off button
Press this button to turn on/off the LED on the panel.
Wi-Fi On/Off button
Press this button to turn on /off the Wi-Fi connection.
Reset button
This button resets or restores the system to its factory default settings.
USB 3.0 port
Insert USB 3.0 devices such as USB hard disks or USB flash drives into this port.
WAN (Internet) port
Connect a network cable into this port to establish WAN connection.
LAN 1 ~ 8 ports
Connect network cables into these ports to establish LAN connection.
Power button
Press this button to power on or off the system.
Power (DC Jack) port
Insert the bundled AC adapter into this port and connect your router to a power source.
10G SFP+ port
Connect a SFP+ fiber module into this port to support 10 Gigabit Ethernet and Fiber
Channel applications.
10G Base-T port
Connect a 10G Base-T copper cable into this port to provide 10 Gbit/s Ethernet
connection.
NOTES:
• Use only the adapter that came with your package. Using other
adapters may damage the device.
• Specifications:
DC Power adapter
Operating
Temperature
Operating Humidity
DC Output: +19V with max 2.37A/3.42A current
0~40
Storage
o
C
50~90%
Storage
0~70
o
C
20~90%
9
Advertisement
Table of Contents
