Uncrating Your Axis - Pure Pressure Axis User Manual

1.6 Uncrating Your Axis

Steps to Safely Uncrate Your Axis
● Tools required for unpacking:
a. Lifting provisions for pallet moving & placing the Axis
■
Pallet jack
■ Fork lift
■ Engine hoist (for removing unit from pallet)
b. Lifting Strap
c. Phillips screwdriver, a driver bit with an impact, or drill works best
d. 9/16" hex socket or flat wrench
1. Inspect all packaging for damage before accepting the shipment. Be sure that
the forklift or something else has not penetrated the packaging and damaged
the product.
2. Cut off any external shrink wrap.
3. Remove any 2x4's supporting the Axis head of the machine first.
4. Take note of any screws that need to be removed to disassemble the sides of
the crate. Start with a large side, then the two smaller sides. and finally the last
large side.
5. Remove the boxes within the pallet. These should contain the guard, paddle,
cable support post, and hardware.
Note: Use team lifting or a
power lift to move the unit
safely!!!
9