Logout - Teledyne 3000PA-EU Operating Instructions Manual

4 Operation 4 Operation 4 Operation
4 Operation 4 Operation
Wait a moment for the entry screen. You will be given clearance to
proceed.
Use the arrow keys to retype your password and press Enter when
finished. Your password will be stored in the microprocessor and the system
will immediately switch to the Analyze screen, and you now have access to
all instrument functions.
If all alarms are defeated, the Analyze screen appears as:
If an alarm is tripped, the second line will change to show which alarm
it is:
Note: If you log off the system using the logout function in the
system menu, you will now be required to re-enter the
password to gain access to Span, Zero, Alarm, and Range
functions.

4.3.4 Logout

The Logout function provides a convenient means of leaving the
analyzer in a password protected mode without having to shut the instrument
off. By entering Logout, you effectively log off the instrument leaving the
system protected against use until the password is reentered. To log out,
press the System button to enter the System function.
Use the < > arrow keys to position the blinking over the Logout
function, and press Enter to Log out. The screen will display the message:
4-8 Teledyne Analytical Instruments
Model 3000PA
Contrast Function is DISABLED
(Refer to Section 1.6)