Aux Operation - LG LAC7700 Owner's Manual

CD TEXT / ID3 TAG
When playing a disc containing information, you can see the CD TEXT/ID3 TAG information.
In CD TEXT, information about the disc (disc title, performer and track title) is recorded.
In a ID3 TAG, information about the file (album title, performer name, song title) is recorded.
In a WMA Content, information about the file (song title, performer name) is recorded.
If there is no information, "NO TEXT" will be shown in the display window.
Press DISP repeatedly during MP3/WMA/CD TEXT file playback.
To go to a particular quickly (
(If there is no folder or one folder.)
Press U U /AS (U U on remote control) to skip to the next 10 track, and press u u /PS (u u on remote
control) to skip to the previous 10 track.
To skip to the next or previous folder
(If there are more than two folders.)
Press U U /AS (U U on remote control) to skip to the next folder, and press u u /PS (u u on remote
control) to skip to the previous folder.
Note
Time display appearing on the display part when playing VBR file may vary and there may be
some difference from actual time (both progress time and VBR are displayed at the same
time when playing file).
AUX operarion
Playing an Auxiliary Equipment
You can connect Auxiliary Equipment to this unit.
Connect one to the external device jack using the line input cable (not supplied), and the
other to the AUX input jack on the control panel.
MP3 Player, etc
1 Press SOURCE to select the AUX as source.
AUX IN appears in the display.
2 Turn on the connected Auxiliary Equipment and start playing the source.
3 Adjust the volume.
Note
• Before operating the Auxiliary Equipment using the following procedure, select the external
input correctly. (Refer to the page 10 for details.)
• If the input level of the Auxiliary Equipment connected to the AUX input jack is not high
enough, adjust the input level properly. (Refer to the page 10 for details.)
CD MP3 WMA
+10/-10 buttons)
MP3
Auxiliary input
18
MP3 WMA
WMA
Line input cable