Navigating Hmi Menu; Start Menu - ABB Zenith ZTG T Series Operation, Maintenance, And Installation Manual

—
4 Navigating menu
—
4.1 Level 3 (LCD) control interface, menu tree
The default password is 00001, enter the
password when prompted (see Fig. 4.1).
By pressing the Enter-key (3) you can:
• open the menu in root page
• enter a new menu page
• accept the function
By pressing Up and Down -keys (2)
you can:
• move in the menu
• choose the parameter value
By pressing Esc-key (1) you can:
• go back in the menu
O P E R AT I O N , M A I N T E N A N C E , A N D I N S TA L L AT I O N G U I D E
Value
Password
****
0
—
Fig. 6 Enter the password when asked, choose the
right number by Up and Down -keys (2) and confirm by
Enter-key (3), go forward setting number after number
Programming
System Parameters
Confirm Abort
—
Fig. 7 After you have changed the parameter, always
go back in the menu by pressing Esc-key and when
prompted confirm changes with Enter-key
21
Modify