Install Software - Epson Stylus Photo R340 Start Here Manual

5

Install Software

Your software works with Windows
OS X 10.2.4 and later.
Windows
1
Make sure the printer is
NOT CONNECTED to your computer.
Note: If you see a screen like this,
click Cancel and disconnect the
USB cable. You can't install your
software that way.
2
Insert the Epson CD-ROM.
3
Read the license agreement that
appears and click AGREE.
4
If you see a message like this,
click OK to begin installing your
printer driver.
5
When you see this screen,
connect the USB cable. Connect
the square end of your USB
cable to the back of your printer
and the flat end of the USB
cable to your computer. (You can
connect to any open port.)
6
Click Print Test Page. Then click Next to install additional software.
7
Install any additional software. When you are done installing software,
click Exit. The registration screen appears.
8
Follow the on-screen instructions to register your printer.
9
When you're done, remove the CD-ROM and restart your computer.
You're ready to print! See the Printer Basics book or your on-screen
User's Guide.
® 98SE, Me, 2000, XP, and Macintosh ®