Step 1; Step 2 - modway EEI-3810 Quick Start Manual

EEI-3810 CHAIR

STEP 1:

1.Please find the Steel Frame (2) on the seat, then put Chair Body (1) upside down on a carpeted or padded
surface.
2. Attach 1 piece of Steel Frame (2) to the bottom of Chair Body (1) by using 4 pieces of Bolts (A) with 4
pieces of Flat Washers (B) and 4 pieces of Spring Washers (C) as shown.
3. Use Allen Wrench (D) to tighten the Bolts (A) clockwise as shown.
2
D
A
C
B
1
A×4 B×4 C×4 D×1

STEP 2:

Carefully turn over the assembled Chair.
Assembly is complete. Your Chair is ready to enjoy now!
Customer Service 908-368-1025—www.modway.com Page 2 of 2