Maintaining Your Printer; Cleaning The Print Head - Epson Stylus Photo 820 Printer Basics Manual

Maintaining Your Printer

Follow the instructions in this chapter to keep your printer working at its best and
prepare it for moving, if necessary.
I
"Cleaning the Print Head" below
I
"Replacing an Ink Cartridge" on page 35
I
"Aligning the Print Head" on page 39
I
"Cleaning the Printer" on page 40
I
"Transporting the Printer" on page 41

Cleaning the Print Head

If your printouts are unexpectedly light, or dots or lines are missing, you may need to
clean the print head. This unclogs the nozzles so they can deliver ink properly. Print
head cleaning uses ink, so clean it only if quality declines.
This section explains how to clean the print head using the Head Cleaning utility
(available only when the printer is connected directly to your computer, not over a
network).
You can also clean the print head by holding down the
printer for three seconds (when the red
For more information about cleaning the print head, see your Print Show movies;
select the
EPSON Printer Information Center
Caution: When you don't turn on your printer for a long time, the print quality can
decline, so turn it on at least once a month to maintain good print quality.
b
maintenance button on the
b
error light is off).
icon on your desktop.
33