Examining The Nozzle Check Pattern; Replacing An Ink Cartridge; Checking The Ink Supply - Epson Stylus Photo 820 Printer Basics Manual

Examining the Nozzle Check Pattern

Examine the nozzle check pattern you
print. Each colored square should be
solid, with no gaps or lines, as shown:
I
If your printout looks okay, you're done.
I
If you see any white lines or gaps
(as shown), clean the print head
again; see page 34 for instructions.

Replacing an Ink Cartridge

b
When the red error light flashes, an ink cartridge is low on ink. (You may also see
a message on your screen.) This is a good time to obtain a new cartridge. When the
b
red error light stays on, you may need to replace one of the cartridges.
When a cartridge is more than six months old, you may need to replace it if printouts
don't look their best. If the quality doesn't improve after cleaning and aligning the
print head, you can replace the cartridge even if the red
Note: The red b error light also comes on if your paper runs out or is jammed, so
make sure to check your paper before replacing a cartridge.

Checking the Ink Supply

To check your ink supply, do one of the
following:
I
Windows: Double-click the
the lower right corner of your screen. If a
cartridge is low on ink, you'll see a
window like this:
Or right-click the
Ink Monitor
Click
Buy Now
browser and order ink cartridges online.
icon in
icon and select
to see your ink levels.
to launch your web
b
error light is off.
Maintaining Your Printer
35