Table of Contents
Advertisement
50
advanced features
All manuals and user guides at all-guides.com
Editing
L-1 OUTPUT/INPUT Setting
The
connector accepts and delivers either a composite signal
AV1 (L-1) IN/OUT
(regular video signal) or a Y/C signal (a signal in which the luminance and
chrominance signals are separated). Set
priate mode depending on the type of unit connected to the rear panel
connector of this VCR.
IN/OUT
get to the output/input set screen
using the A and B buttons and press
OUTPUT/INPUT SET
Move the highlight bar to
select mode
or
using the A and B
OUTPUT
L-1 INPUT
buttons. Press
(or E) to select the
desired mode:
FOR L-1 OUTPUT
•
: If a connected device's input is
VIDEO
compatible only with regular
video signals, set to
•
: If a connected device's input is
S-VIDEO
compatible with Y/C signals, set to
. This setting will let you take advantage of higher-quality
S-VIDEO
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
FOR L-1 INPUT
•
VIDEO
: If a connected device's output is compatible only with regular video
signals, set to
•
: If a connected device's output is compatible with Y/C signals, set to
S-VIDEO
. This setting will let you take advantage of higher-quality
S-VIDEO
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
return to normal screen
NOTES:
• If
L-1 OUTPUT
is set to
• If
is set to
L-2 SELECT
L-1 OUTPUT
Press m. Move the highlight bar to
L-1
VIDEO
.
.
VIDEO
Press m.
S-VIDEO
, it is impossible to set
, it is impossible to set
DECODER
and
to the appro-
L-1 INPUT
AV1 (L-1)
(or E).
OUTPUT/INPUT SET
F
L-1 OUTPUT
VIDEO
L-1 INPUT
VIDEO
L-2 SELECT
A/V
L-2 INPUT
VIDEO
[1] a k
[MENU]: EXIT
L-1 INPUT
to
S-VIDEO
to
L-1 INPUT
S-VIDEO
.
.
Advertisement
Chapters
Table of Contents
