Status; Exit - Brainchild VR18 User Manual

Report
Press Mode key to choose Report. This mode is only available after the option of Math. Counter, Totalizer
& FDA 21 CFR part 11 was ordered before. It produces reports about Counters 1-6, Totalizers 1-18, AI1-
AI18 MinMaxAve( Minimum, Maximum and Averaged values of analog inputs in certain period of time ),
Math1-Math18 MinMaxAve and All CH MinMaxAve. Press Report key to select it as Report List ( all
reports within a day, for example 3 reports for 3 shifts a day ), or select it on daily, weekly or monthly base.
Press directional keys ← → to choose the exact day, week or month.
Figure 3 – 5

3.5 Status

Press Status key, the Status List displays present status of digital input DI, digital output DO ( alarm
relay ), Counter and Totalizer. Press Mode key to choose any mode of DI, DO, Counter or Totalizer.
Display shows the status DI, DO, Counter or Totalizer at the present time. Counter and Totalizer are
available if the option of Math, Counter & Totalizer was ordered before.

3.6 Exit

Press Exit key to close existing operation, the soft keys on the left hand side disappear giving full display.
Press any soft key on the left hand side, these six soft keys Page, Mode, History, Event, Status and Exit
appear again. Open the plastic cover at the front low side then another five soft keys Dump, Clear,
Operate, Config & Shutdown appear.
28