Event - Brainchild VR18 User Manual

3.4 Event

Press Event key, the Event /Alarm List displays general Events, Alarms and Reports. Press Mode key to
choose Evnt/Alam ( Event/Alarm ) or Report.
Event/Alarm
It displays the Ack (acknowledgement), Type, Source, Active time, Clear time and Value of events or
alarms. Use directional keys ↓ ↑ to move downward or upward. Press Ack key to acknowledge the alarm.
Events do not need to be acknowledged. Press Back key going back to the original display.
On the Event / Alarm List, three different colors indicate the status of the alarm.
Red - Presently in alarm status.
Green – The cause of alarm status was temporary, and has now returned to normal.
Gray – A temporary alarm (in green status), after having been acknowledged, and then becomes gray.
Active Time is the time that alarm status becomes active. Clear Time is the time when two conditions are
met. Firstly alarm status is cleared and becomes normal, and secondly the user has acknowledged it. If any
alarm occurs, the red buzzer icon on the top right starts to flash. After the cause of alarm is no longer met
and the alarm is acknowledged, then the red buzzer icon disappears. When Clear Time shows Terminated
this indicates that turning off the power has terminated the alarm.
Figure 3 – 4
27