Installing In Macintosh - Epson Stylus Photo 790 Setup Manual

Installing EPSON PhotoQuicker
1. After the setup is complete, the installer dialog box appears again.
Choose Install EPSON PhotoQuicker, click
installer dialog box does not appear automatically, double-click the
My Computer icon, and double-click the CD-ROM icon, then
EPSON PhotoQuicker.)
2. Follow the on-screen instructions.
3. When a message appears informing you that installation is
complete, click Finish.
After the setup is complete, proceed to section

Installing in Macintosh

Follow the instructions in this section to install the printer software,
select your printer in the Chooser, and install the EPSON PhotoQuicker.
Caution:
c
Turn off all virus protection programs before you install the printer
software.
Installing the printer software
Follow these steps to install your printer software.
1. Turn on your Macintosh and insert the software CD in the CD-ROM
drive. The EPSON printer software CD-ROM opens automatically.
2. If separate folders for several languages appear, double-click the
folder for your preferred language. Open the Installer folder and
then double-click the Installer icon.
Note:
It is possible to install the Reference Guide on your hard drive from the
printer software CD-ROM. To install the guide, insert the CD in the
CD-ROM drive and open the Online Guide folder in your preferred
language folder. Then double-click the EPSON STYLUS PHOTO 790
icon. Click Install Reference Guide and follow the on-screen
instructions. When the installation is complete, a View Reference
Guide icon appears in the EPSON STYLUS PHOTO 790 folder.
Double-click the icon to open the guide.
It is possible to access Technical Support from the printer software
CD-ROM. Insert the CD in the CD-ROM drive and open the Installer
folder in your preferred language folder. Then double-click the
Technical Support Web Site icon.
, then click OK. (If the
to print your first page.