Epson Stylus Photo 790 Setup Manual page 10

1. Lower the output tray, then open the
printer cover.
2. Turn on the printer by
pressing the P power button.
The print head moves to the
center, which is the ink
cartridge installation position.
The P power light flashes and
b
the error light comes on.
Caution:
c
Do not move the print head by hand. Doing so may damage the
printer.
3. Push back the release tabs and lift up the ink
cartridge clamps.
4. Open the ink cartridge
packages. Next, remove
only the yellow tape seals
from each cartridge.