Sharp Plasmacluster FP-F30J Operation Manual page 9

Light Control
You can set the Plasmacluster Ion Indicator to OFF when the Plasmacluster Ion Indicator is bright.
ON
more than 3 sec.
Plasmacluster Ion ON/OFF
When Plasmacluster Ion is ON, the Plasmacluster Ion Indicator Light will turn on. (blue)
ON
Auto RESTART
If the unit is unplugged or if there is a power failure, the unit will resume operation with the previous
settings after power is restored.
ON
(with the unit OFF)
If the ,
OFF
more than 3 sec.
OFF
OFF
(with the unit OFF)
more than 3 sec.
Lighting
, lamp Lights up for 10 seconds, the setting is completed.
NOTE
• When the unit starts operation, the
Plasmacluster Ion Indicator always
lights.
• In SLEEP mode, Light Control
button doesn't operate.
NOTE
When Indicator is off,
• If Plasmacluster Ion is ON,
Flashing
• If Plasmacluster Ion is OFF,
Lighting
more than 3 sec.
Flashing
E-7
OFF
3 sec.
OFF
3 sec.