Advertisement
TROUBLESHOOTING
Before calling for service, please review the Troubleshooting list below, since the problem may not
be a unit malfunction.
SYMPTOM
Dust and smoke are not removed.
A clicking or ticking sound is heard
from the unit.
The discharged air has an odor.
The Plasmacluster Ion Indicator
doesn't Light on.
REMEDY (not a malfunction)
•Clean or replace the filter if they appear to be heavily
soiled.(Ref. E-8,E-9 )
• Clicking or ticking sound may be audible when the unit
is generating ions.
•Check to see if the filter are heavily soiled.
Replace the filter.
•Plasmacluster Air Purifiers emit small traces of ozone
which may produce an odor. These ozone emissions
are well below safety levels.
•Check to see if the SLEEP mode is selected.
The Plasmacluster Ion Indicator Light is turned off
3 seconds after the SLEEP mode is selected.
•Check to see if the Plasmacluster Ion OFF is selected.
Press
to light on.
•Check to see if the Light Control is selected.
Press
for 3 seconds to light on.
E-10
Advertisement
