Note :
Follow the disassembly procedure in the numerical order given.
2-1. CABINET FRONT (R) ASSY
2-2. HOLDER (WITH DRIVER)
2-3. GEAR (TUNING) INSTALLATION
SECTION 2
DISASSEMBLY
2 Cabinet front (R) assy
Claws
3 Holder
1 Unsolder two lead wires.
Model name (SRF-H3)
2
CV1
1
Claws
Cabinet rear (R) assy
Precision screwdriver
2 Push this
portion down.
Cabinet rear (R) assy
Gear (tuning)
1 Turn CV1 fully in the
direction of arrow.
Cabinet rear (R) assy
— 3 —