Section 1 Disassembly - Sony MDR-V500DJ Service Manual

Note : Disassemble the unit in the order as shown below.
Set Driver (L side)
Driver (R side)
Note : Follow the disassembly procedure in the numerical order given.
1-1. DRIVER (L SIDE)
Precaution during installation
Driver (L side)
Marking side
Green
Cord
(with plug)
1-2. CORD (WITH PLUG)
3 Two claws
2 Housing
1 Bushing
ring (L)
3 Housing (L)
DISASSEMBLY
Cord (with plug)
Hunger (R)
Red
Harness
Natural
4
1 Remove the wiring bracket.
SECTION 1
Hunger (L)
5 Remove the
five solderings
6 Driver (headphone) (040F016)
4 Rotate it in the direction of the arrow.
3 Front assembly plate
Hook the loop of the
cordaround the rib of
the portion A.
A
2 Cord
(with plug)
— 2 —
2 Three screws (+P2.6
Precaution during installation
Fasten the cord at the specified
dimension as shown, to cut the
excessive length.
15mm 15mm
6)
1 Ear pad