Video Settings - Pioneer AVH-A315BT Owner's Manual

Menu Item Description
[Subwoofer] Select enable or disable subwoofer output from this
[On] [Off] product.
[Speaker Level]
Adjust the speaker output level of the listening position.
1
[Front Left] [Front Right] Touch
[Rear Left] [Rear Right] select the output speaker.
2
[Subwoofer] [Listening Touch
Position] level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Rear Speaker Output].
[Crossover] Select a speaker unit (filter) to adjust the HPF or LPF cut-off
frequency and the slope for each speaker unit (page 22).
[Subwoofer Settings] Select the subwoofer phase, LPF cut-off frequency and the
slope (page 22).
[Listening Position] Select a listening position that you want to make as the
[Off] [Front-L] [Front-R] centre of sound effects.
[Front] [All]
[Time Alignment] Select or customise the time alignment settings to reflect
[Front Left] [Front Right] the distance between the listener's position and each
[Rear Left] [Rear Right] speaker. You need to measure the distance between the
[Subwoofer] [Listening head of the listener and each speaker unit.
1
Position] Touch
select the alignment speaker.
2
Touch
selected speaker and listening position.
NOTE
This function is available only when the listening position setting
is set to [Front Left] or [Front Right].
[Bass Boost] Adjust the bass boost level.
[0] to [+6]
[Rear Speaker Output] Select the rear speaker output.
[Rear] [Subwoofer]
NOTE
This function is available when the source is off.
[Loudness] Compensates for deficiencies in the low-frequency and
[Off] [Low] [Mid] [High] high-frequency ranges at low volume.
NOTE
This function is not available while you make or receive a call using
the hands-free function.
22
En
or to select the listening position then
or to adjust the selected speaker output
or to select the listening position then
or to input the distance between the
Adjusting the cutoff frequency value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Front, Rear, Subwoofer.
NOTE
[Subwoofer Settings] is available only when [Subwoofer] is [On].
1
Press .
2
Touch then .
3
Touch [Crossover] or [Subwoofer Settings].
4
Touch or to switch the speaker.
5
Touch or to set the cutoff position.
6
Touch or to set the cutoff slope.
The following items can also be set.
Switches the subwoofer phase between normal and reverse position.
Switches the LPF/HPF setting to [On] or [Off].
LPF/HPF

Video settings

The menu items vary according to the source.
[DVD Setup]
This setting is available when the selected source is [Disc].
Menu Item Description
[Subtitle Language]*1*2*3 Set a subtitle language preference. When you select
[Others], a language code input screen is shown. Input the
[Audio Language]*1*2*3
four-digit code of the desired language then touch
[Menu Language]*1*2*3
.