Safety; Warning; Caution - Perten Aquamatic 5200 Operation Manual

1 Safety

1.1 Warning

Ensure that the transport locks are disengaged before switching the
instrument on. Follow the instructions in Section 5.1.
To prevent operator injury or damage to the instrument, verify that the
line voltage is correct before connecting the mains power. This
information is located on the name plate of the instrument. Also, ensure
the main power cable is connected to a power outlet with protective earth
ground.
Apart from the measurement cell, accessed through removal of the top
cover, there are no user serviceable parts inside the instrument. Perten
Instruments takes no responsibility for injury or damages caused by
personnel not specially trained for AM 5200 (-A) service.
In the event of a power cable connector failure, the replacement must be
made only by qualified personnel.

1.2 Caution

The AM 5200 (-A) must only be used for analysis of unground grain,
oilseed, beans, pulses and similar product.
The Transport Locks (see section 5.1.2) are located near sharp edges.
Wear gloves and use caution when removing and setting Transport Locks.
Operation Manual AM 5200 (-A) E5200EN3 v 1.1 May 2013
3 (36)