Table of Contents
Advertisement
05 Temp.
06 Delay End
07 Wash
08 Spin
09 Activ Dual
Wash Drain
10 Power
11 Start/Pause
WA7700J_WA10J7750GW-03520M-00_SA.indd 29
Press the button repeatedly to cycle through the different water
temperature options.
• Hot - Whites and heavily soiled, colorfast items.
• Warm - Colorfast items.
• Cold - Brightly colored, very lightly soiled items.
Delay the end of any cycle for up to 19 hours in one-hour increments.
Displayed hour indicates the time the wash will be ended.
Press this button to only perform a wash cycle or to adjust the wash
time.
Press this button to perform a spin cycle only or to adjust the spin
time.
You can set the spin time from between 1 to 9 minutes. (except for
WATER SAVING )
When only a spin is selected, the spin time will be different from the
total remaining time. This is because the total remaining time includes
the actual spin time and the times for water draining and stopping.
This button provides two options, and is available only when the
washing machine is stopped or in Standby state.
• Water Save (default): Reuse water in the tub that remains
after using Water Jet. The water will be used for the main cycle.
• Drain: Select to drain water that remains after using Water Jet.
When draining is complete, the washing machine switches to
Water Save mode automatically. Then, you can choose a cycle.
Press once to turn your washer on. Press again to turn your washer
off. If the washer is left on for more than 10 minutes without any
buttons being pressed, the power automatically turns off.
Press to pause and restart cycles.
English 29
2015/7/22 18:34:27
Advertisement
Table of Contents
