Introduction
System Requirements
To use your printer and its driver, your system should have:
®
An IBM
compatible PC with at least a 386/25 MHz or
faster processor
®
Windows
3.1x, Windows for Workgroups 3.11
Windows 95, or Windows NT
At least 16MB of RAM (more for Windows 95)
At least 20MB of free hard disk space for storing images
(50MB or more is recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
A shielded, twisted-pair parallel cable (6 to 10 feet long) to
connect your computer to the printer; the cable must have
a D-SUB, 25-pin, male connector for your computer and a
36-pin, Centronics
To use the
EPSON A
Windows NT), you need at least a 486/33 processor. You also
should have at least 20MB of free hard disk space for full
program installation or at least 8MB of free hard disk space to
run
nswers from the CD.
EPSON A
For system requirements for the
oftware
uite, see your Setup Guide.
S
S
2
®
4.0
®
compatible connector for the printer.
nswers online guide (not available for
EPSON P
,
™
erfect
icture
P