Razor POWER A2 Quick Start Manual page 2

Step 3
Using a small flat screwdriver, remove the grommet
inside the opening of the deck.
Step 5
Using a smal flat screwdriver, remove the C ring from the
folding mechanism pin. Slide the pin out from the frame.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Step 4
Unfold the unit. Using a pair of long needle nose pliers,
remove the spring from the folding mechanism pin.
Step 6
Using a 3 mm Allen wrench, remove the set screw at the
back of the folding knob while holding the knob.
2